Hardware Features
Shelf configuration
Total 6 slots (AC) / 7 slots (DC)
2 slots for service cards
2 slots for switch & control cards
1 slot for AC power card / 2 slots for DC power cards
1 slot for fan module
System capability
Switching capacity of backplane bus: 1.8 Tbit/s
Switching and control card: 240 Gbit/s
System switching capacity: 480 Gbit/s
Uplink interface card
4 * 10GE/GE uplink per card (on switching and control card)
Subscriber card density
GPON card: 16 ports per card
XGS-PON card: 16 ports per card
XG-PON card: 16 ports per card
XG-PON & GPON Combo PON card: 16 Combo PON ports per card
XGS-PON & GPON Combo PON card: 16 Combo PON ports per card
Any-PON card: 16 Any-PON ports per card
10G-EPON card: 16 ports per card
P2P card:16 ports 10GE SFP+/GE SFP, or 24 CSFP P2P GE/FE (supports 48-port)
Management & Maintenance
1 out-of-band management interface
1 maintenance serial interface
1 Environmental detection serial interface
1 clock interface provided by SPUFS
1 line card debugging serial interface
GPON
Compliant to ITU G.984.x, G.988
Support up to 1:128 optical split ratio
Support OLS (Optical Line Supervision)
Support optical link protection
Support downstream/upstream FEC
Supports AES-128 encryption
Maximum logical distance: 60 km
Maximum differential distance: 40 km maximum physical distance : 60 km
XG-PON
Compliant to ITU G.987.x and G.988
Support up to 1:256 optical split ratio
Support OLS (Optical Line Supervision)
Support optical link protection
Support downstream/upstream FEC
Supports AES-128 encryption
Maximum logical distance: 60 km
Maximum differential distance: 40 km maximum physical distance : 60 km
XGS-PON
Compliant to ITU G.9807 and G.988
Support up to 1:256 optical split ratio
Support OLS (Optical Line Supervision)
Support optical link protection
Support downstream/upstream FEC
Supports AES-128 encryption
Maximum logical distance: 60 km
Maximum differential distance: 40 km maximum physical distance : 60 km
Combo PON
Each port integrates GPON optical module, XG-PON/XGS-PON optical module and WDM1r
Support up to 1:128 optical split ratio
Support OLS (Optical Line Supervision)
Support optical link protection
Support downstream/upstream FEC
Supports AES-128 encryption
Maximum logical distance: 60 km
Maximum differential distance: 40 km maximum physical distance : 60 km
L2/L3 Features
L2 Features
Access control: MAC filtering, ACL
L2-port: Physical Ethernet ports, logical Vports and aggregation ports, support L2 services and TPID configuration
128K mac address, 1:1 VLAN, N:1 VLAN and TLS VLAN, VLAN translation, VLAN stacking, flexible QinQ
Permanent MAC, MAC address aging/learning/query/number limit
Uplink protocol: STP/RSTP/MSTP, LACP
L3 Features
Basic routing: unicast routing forwarding, static route, IP based load balance, ECMP
Dynamic routing: RIPv1/v2, OSPFv2/v3,
BGP4, IS-IS v2, graceful restart, MD5, etc.
DHCPv4: DHCP relay/proxy, Option 82,
Option 60 ARP: ARP protocol, ARP Proxy
IPV4 host route table: 64K
IPV6 host route table: 64K
QoS Features
Supports SP, WRR, and SP+DWRR queue scheduling on Ethernet ports, PON ports, and Vports
DSCP labeling and relabeling
Traffic statistics
H-QoS
Stream classification, rate limiting, shaping and priority setting
Congestion Avoidance: tail drop, color- based RED, WRED
Configuration of CIR/PIR/CBS/PBS/CM, TrTCM(Two Rate Three Color Marker)
Security Features
Network security
Broadcast/multicast flooding rate limitation
Downstream ARP filtering
Forwarding panel protocol packet rate limit
DHCP anti-spoofing
Anti-DoS attacking
ARP/IP anti-spoofing
IP Source Guard
ACL
Service security
DHCP service security
MAC address anti-drifting
Port isolation: Uplink port/User port
Broadcast packets isolation based on Vlan
System security
L4 port disable
CPU protocol packet rate limit and scheduling
OAM Features
Management protocol and interface: CLI, Telnet/SSHv2, SNMP v1/v2/v3, IGMP/MLD proxy/snooping model, Alarm and performace model.
Perfomance statistic and diagnosis
Remote firmware download and upgrade
Environment detecting, control and alarm
Ethernet OAM: 802.1ag/Y.1731
System fault auto-recovery and performance detection.
Multicast
IGMP v1/v2/v3, IGMP snooping, IGMP proxy, SPR, and Router
MLD v1/v2
Multicast VLAN: 4K
IGMP multicast group quantity: 4K
ASM/SSM mode based on IGMPv3 and MLDv2
Supports SCB multicast forwarding and L3 multicast forwarding
Global or VLAN protocol enable or disable
Power Supply
DC Working voltage: -48 V (±20%), or -60 V (±20%)
AC Working voltage: 100V ~ 240V
Environment
Operating temperature-40 ℃ ~ 65 ℃ for overall unit
Starting up temperature ≥ -25℃
Operating humidity: 5% ~ 95%, non-condensing
Altitude: ≤ 4000 m
Air pressure: 70 kPa~106 kPa
Dimensions
Shelf: 88.1 mm x 482.6 mm x 283.5 mm (Height × Width × Depth)
Weight
Empty chassis: 3.93 kg
Full configuration: < 13 kg
Please kindly click here to download detail datasheet for ZXA10 C610E ZTE.